Request a quote

New IBC totes, quoted by the load and delivered across the US

New bottle, new cage, new pallet: 135 to 550 gallons, in composite and steel. Tell us the product and the ZIP and we quote the totes with the freight.

Request a quote
Four new IBCs side by side on a concrete apron: a short 135 gallon caged tote, a 275 and a taller 330 gallon caged tote on black composite pallets, and a stainless steel IBC in its frame
The range, left to right: 135, 275 and 330 gallon caged totes and a stainless IBC.Illustrative image, generated. Not a photograph of our stock or deliveries.
  1. 135 gallon tote135 gal, about 511 Lshort caged tote
  2. 275 gallon tote275 gal, 1,040 Labout 46 in tall
  3. 330 gallon tote330 gal, 1,250 L53 to 54 in tall
  4. Stainless IBC350 gal, about 1,325 Labout 475 lb tare

What new means

New means three new parts: the HDPE bottle, the galvanized cage and the pallet. Nothing has been in it. Most totes in the US are sold used, rebottled or reconditioned, and that suits a lot of buyers. It doesn't suit a shipper who needs a current UN plate with the whole retest window, or a QA team that signs off only on a first-use bottle.

PartNewRebottledReconditioned
BottleNew HDPENew HDPEUsed, cleaned
CageNew galvanizedUsed, inspectedUsed, inspected
PalletNewUsed, with the cageUsed
Date on the plateThis yearVaries; read itOriginal, plus retest
Prior contentsNoneNone in the bottleYes, cleaned out

New, rebottled or reconditioned: the full guide

The date on the plate

Every UN-marked tote carries its month and year of manufacture. On a new tote it is this year, so the 2.5-year leakproofness retest under 49 CFR 180.352 starts when it reaches you.

  1. UN symbol The UN packaging symbol: the tote was built to a tested, approved design.
  2. 31HA1 The design code: 31 is a rigid IBC for liquids, H a plastic inner bottle, A a steel outer cage, and 1 marks a rigid (not flexible) bottle.
  3. Y The packing groups it was tested for. Y covers Packing Group II and III. No IBC may carry a Packing Group I liquid.
  4. MM YY Month and year of manufacture. On a new tote it is this year, and the 2.5-year retest clock starts from it.
  5. USA The country that authorized the marking.
  6. Maker The manufacturer’s name or symbol, with the approval number.
  7. #### kg Stacking test load: the weight the tote may carry stacked on it.
  8. #### kg Maximum permissible gross mass: tote plus contents.
Drawn after the marking rule in 49 CFR 178.703; the weights are shown as #### because they differ by design. Composite totes also carry the month and year of the last leakproofness test and inspection.

The range

Four totes cover most orders. Each has its own page with the full spec table.

  • A new 275 gallon caged tote on a black composite pallet: white bottle, galvanized cage, screw cap on top and a discharge valve at the foot
    Illustrative image, generated. Not a photograph of our stock or deliveries.

    275 gallon caged tote

    The standard 1,000 litre tote. Replaces five drums.

    Capacity
    275 gal
    Size
    48 x 40 x 46 in
    Tare
    about 127 to 135 lb
    Code
    31HA1/Y

    Request a quote Full spec table

  • A new 330 gallon caged tote on a black composite pallet, taller than the 275, with a screw cap on top and a lever valve at the foot
    Illustrative image, generated. Not a photograph of our stock or deliveries.

    330 gallon caged tote

    Fifty-five gallons more on the same base, for plants with the headroom.

    Capacity
    330 gal
    Size
    48 x 40 x 53 to 54 in
    Tare
    about 155 lb
    Code
    31HA1/Y

    Request a quote Full spec table

  • A whole stainless steel IBC in its stainless frame, with a top manway and a bottom outlet valve, standing on concrete
    Illustrative image, generated. Not a photograph of our stock or deliveries.

    Stainless steel IBC

    For flammables and sanitary products, refilled for years.

    Steel
    304, 10 gauge
    Sizes
    350, 550, 793 gal
    Tare, 350
    about 475 lb
    Code
    31A

    Request a quote Full spec table

  • A grey painted carbon steel IBC with corner lifting lugs, a top manway and a ball valve at the base
    Illustrative image, generated. Not a photograph of our stock or deliveries.

    Carbon steel IBC

    The metal IBC for solvents and fuels, where stainless is more than the product needs.

    Shell
    carbon steel
    Approval
    often UL 142
    For
    Class I flammables
    Code
    31A

    Request a quote Full spec table

Also: 135 gallon, 550 gallon, food-grade, UN-rated and water totes, or the whole range.

Choosing the rating

UN code and packing group

A caged tote for regulated liquid is marked 31HA1, then a letter: Y means tested for Packing Group II and III. No IBC may carry a Packing Group I liquid. Reading the UN marking

Specific gravity

Tell us the product's specific gravity and we'll quote a tote rated for it, Y1.6 or Y1.9. A dense product needs the higher rating. Specific gravity ratings

Food-contact bottles

For anything people eat or drink, the bottle is moulded from food-contact resin under 21 CFR 177.1520 and has held nothing else. Food-grade or not

Not for Class I flammables. A plastic or composite tote is the wrong container for a Class I flammable liquid. Ask us about a UN31A steel IBC instead.

Close view of the discharge valve on a new caged tote: blue lever handle, black valve body and its dust cap on a tether, above a black composite pallet
The discharge valve on a new tote, lever handle and dust cap fitted.Illustrative image, generated. Not a photograph of our stock or deliveries.
Top of a new white tote bottle seen through the cage bars, with a black screw fill cap seated in the opening
The screw fill cap on top of a new tote bottle.Illustrative image, generated. Not a photograph of our stock or deliveries.

Valves, caps and fittings

Most new totes drain through a 2 in valve, butterfly or ball, with a 3 in outlet on some builds. The outlet ends in a camlock coupling or an NPT thread, and the gaskets in the valve and cap are EPDM for water-based products or Viton for many solvents and oils. On top, a screw fill cap, 6 in on the common designs, vented or solid.

Say what your line runs: the hose coupling, the pump, the product. We'll match the valve, outlet and gasket so the tote connects on arrival without an adapter.

Valves and fittings on a new tote · Caps, lids and vents

Who buys new totes

Chemical blenders and distributors

UN-rated 275s and 330s for hazmat liquids going out to customers, usually by the truckload, each with a current plate and the packing-group rating the product's specific gravity calls for.

Food and beverage plants

First-use, food-contact bottles for syrups, oils, juice concentrate and ingredients, from a pallet of two to repeat monthly orders, with the gasket and fill temperature on the quote.

Coatings and solvent users

UN31A stainless or carbon steel IBCs of 350 to 550 gallons for flammable and combustible liquids a plastic tote can't hold, one to a few at a time.

Farms and homes storing water

One to four new 275 or 330 gallon totes for drinking water, livestock water or rain catchment, with no chemical history to worry about.

Every industry we quote for

Delivered across the US

We quote every order delivered: the totes and the freight to your ZIP, in one figure. A 53 ft trailer carries 28 to 56 totes of 250 to 350 gallons, depending on whether they ride stacked and on the load's weight; caged totes usually ship two to a stack. A full load spreads the freight over many totes. A pallet of two carries it alone, and we'll say so on the quote.

Tell us whether the site has a dock or needs a liftgate, and any delivery hours. We work with buyers in every state in the lower 48; the state pages cover the industries that fill totes in each.

New totes by state · Texas · California · Illinois · New Jersey · Ohio · Wisconsin

A US tractor and flatbed trailer loaded with caged totes stacked two high and held down with yellow straps
A flatbed load of caged totes, stacked two high and strapped down.Illustrative image, generated. Not a photograph of our stock or deliveries.

Request a quote for new totes

Tote type and size, UN rating, product and specific gravity, valve, quantity, how often and the delivery ZIP. Give what you know; we'll ask about the rest.